Showing 1–16 of 24 results
Pellethead Replacement Lennox & Whitfield Profile 30 Door Gasket Kit W/ Sealant, 1 PC. Wrap Around Glass, 7/8″ x 8′$26.00
Pellethead Replacement Lennox, Whitfield, Earth Stove, Traditions Firebox Door Gasket Kit, 3/4″ x 7′$18.00
Pellethead Replacement Lennox Earth Stove & Traditions Gas, Pellet, Woodstove Window Channel Glass Gasket, 3/4″ x 7′
Pellethead Replacement Lennox Earth Stove Woodstove Firebox Door Rope Gasket Kit, 3/4″ x 7′$18.00
Pellethead Replacement Lennox Earth Stove Woodstove Firebox Door Rope Gasket Kit, 1/2″ x 7′$13.00
Pellethead Replacement Lennox Earth Stove Woodstove Firebox Door Rope Gasket Kit, 5/8″ x 9′$15.00
Pellethead Replacement Lennox Profile 30 & Whitfield Optima 3 Door Gasket Seal Kit, 3 Separate Panes of Glass, 3/4″ x 7′$18.00
Pellethead Replacement Whitfield Quest & Advantage Series Door Gasket Seal Kit, 1/2″ x 7′$11.00
Whitfield Advantage Series WP2 Glass Window Gasket Seal, Aftermarket$28.99
Whitfield Advantage Series Ash Door Gasket Seal, Aftermarket$17.99
Whitfield & Lennox Pellet Stove Glass Gasket Seal, Aftermarket$28.99
Whitfield & Lennox Combustion Blower Exhaust Fan Gasket, Large 7″, Aftermarket$7.95
Pellethead Replacement Whitfield, Lennox, Iron Strike Combustion Blower Motor to Housing Gasket, 6″ Round$7.95
NuFlex High Temperature Black Silicone Sealant Adhesive, 2.8 oz$7.95
Pellethead Replacement Whitfield, Lennox, Iron Strike Combustion Blower Motor to Housing Gasket, 6″ Round Silicone$9.99
Whitfield & Lennox Combustion Blower Exhaust Fan Silicone Gasket, Large 7″, Aftermarket$12.40
All Whitfield pellet stoves will use a round style rope gasket for the firebox door. Depending on the model there will be variances in the size gasket needed for replacement. The door gasket seal should be tight all the way around while the unit is in operation. As our door gasket wears it can cause air leakage which will affect our fire, efficiency, and can trip the vacuum switch causing the auger feed motor not to work. Generally speaking, door gasket typically lasts 4-7 seasons before replacement is needed. You can use a dollar bill to do a gasket check. With the stove off, place the dollar bill half in and half out of the door. Close the door and pull on the dollar bill. There should be heavy resistance. Test in multiple places around the door. If any area has light resistance or the dollar bill pulls right through, the door gasket should be replaced. See our helpful guide video below for door gasket replacement tips and tricks.
Whitfield glass gasket is a flat tape style fiberglass gasket that creates the seal from the glass to the door frame. Visually inspect this gasket when you are performing your routine maintenance to ensure it is making proper seal. Over time this gasket will get brittle and cause air leaks that will affect the fire and performance of your Whitfield. When it comes time to replace your glass gasket, please follow along with our installation video below.
The Whitfield combustion blower motor will have a round 6″ or 7″ gasket that seals the motor to the motor housing depending on your model. The original is a liotherm ceramic style gasket and we also offer a silicone gasket for better longevity. When you remove your combustion motor for maintenance or service, you must make sure this gasket is in tact. Generally speaking the liotherm gasket has to be replaced every time the motor is removed, whereas the silicone gasket can generally be re-used. Additionally, your Whitfield will have a combustion blower housing gasket that goes from the motor housing to the stove manifold. If you are pulling out the full combustion blower exhaust fan assembly, inspect this gasket and replace if there are cracks, breaks, or heavy wear.
The Whitfield convection fan, also referred to as the distribution blower motor, will have a mount gasket seal. When pulling out your convection fan for maintenance or service, inspect this gasket and replace if it is no longer making a proper contact or seal.
Select Whitfield pellet stove models have an ash pan door that has a gasket seal. If you have an ash pan door seal gasket on your Whitfield model, inspect this during your routine maintenance and replace this gasket when it is worn or no longer making a proper seal.
If you have a Prodigy I, Prodigy II (WP3), Renaissance (WW1), or the Waterford Erin pellet stove, we do carry the specialty O-Ring doughnut gaskets used on the burnpot/firepot grate weldment secondary air tube.