St. Croix Ashby-P Pellet Insert

Built to replace your current source of wood burning heat, the Ashby pellet insert offers all the benefits of a standard pellet stove while fitting into your existing fireplace profile. With electronic ignition, easy-cleaning features and a wall-mount thermostat, you’re able to efficiently control the perfect fire—so you can enjoy a heating source that’s both conventional and contemporary.

Comes with standard size surround (32×45) and black trim.

Heating Area 1,800 sq. ft.

Heat Output 10,500-40,000 btu.

Automatic Ignition Yes for the pellet version, no for corn.

Manual Ignition Yes, if needed using pellets. Corn burning version must be lit manually.

Hopper Capacity 60 lbs.

Burn time 48 hours on the low heat setting

Fuel Type Pellets and cherry pits can be used with the versa-grate system installed. Pellets, corn, wheat, rye, cherry pits and distillers grain can be burned with the multi-fuel burn system installed.

Glass Air Wash No

Built in Blower Yes

Convection Blower Capacity Two convection fans capable of working independently. Capacity undisclosed

Thermostat Compatible Yes, available as an option.

E.P.A. Approved Yes, for wood pellets

Emissions 1.4 gm./hr.

Efficiency 78%

Dimensions for the St Croix Ashby Fireplace Insert

Dimensions Insert

Height 19.2 ins
Width 23 ins.
Depth 12 ins. onto hearth, 15.75 ins. into fireplace

Min. Fireplace Size

Height 16.5 ins for pellet version, 20.6 ins for corn version
Width 24 ins.
Depth 16 ins

Insert Surround Dimensions

45 ins. by 32 ins. for the standard surround

Stove will come with the standard surround by default.  Please call us if you need alternate sizing.

Weight 267 lbs.

Window Size 25 ins. by 10 ins.

Flue Vent Size 3 in.

Rear Vent Yes, vertical or horizontal

Rear Vent Height 6 ins.

Color: Matte black, with accents in gold, nickel or black

Exhaust Temperature Sensor Yes

Low Draft Shutdown Yes

Construction Type Fabricated steel

Automatic Shutdown and Re-ignition Yes, with optional thermostat

Downloads:

Owner’s and Installation Manual 

*Dimensions for product images are in inches. Refer to installation/owner’s manual for detailed specifications on installing this product. Hearth & Home Technologies reserves the right to update units periodically. Product installation must adhere strictly to instructions shipped with product.*

Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the Owners Manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owners/installation manual.*Heating capacity to be used as a guide only. See your local sales associate for help in determining the product that best suits your heating needs based on climate and home efficiency.

¹BTU/hr Input based on maximum feed rate per hour multiplied by approximately 8,600 BTUs, which is the average BTUs from one pound of pellets
²Please speak to one of our helpful representatives for assistance in determining the product that best suits your heating needs based on climate, home efficiency, location of the heater, and air movement in the room.
³Weighted Average LHV (Low Heating Value) Efficiency

Why Choose Pellethead?

Specs