How to Replace Your Harman Control Circuit Board, Replacing Harmon Control Module
This is an instructional how-to guide for replacing a Harman Control Board. The Platinum Board as shown in the video is used for several Harman models. The control board replacement for non-automatic Harman models, the PC45, along with Harman furnace and boiler models is very similar. Every Harman control board replacement will come with a pamphlet for setting the dipswitches on the control board prior to installation. Dipswitch settings may be different on the new control board replacement compared to your existing control board dipswitch settings. Be sure to review the control board pamphlet and set the dipswitches to the correct positions before installing. Highlight video below and breakdown on Harman dipswitch settings for reference. We do offer all Harman control boards at the guaranteed lowest price with the fastest free shipping. Links for each are below for your convenience.
Whether due to a failure of the control board, lightning strike, or power surge, this how-to instructional video will save you time and money as you need to install a new control board in your stove.
Please make sure your stove is ALWAYS unplugged from the wall before performing any service work. Comment below if this video was helpful or if you need additional technical assistance.
Browse Harman Control Boards
Browse parts by make & model
Looking for a better way to clean? Browse ASH VACUUMS
Any Further Questions or Technical Assistance Needed Please Leave us a Comment Below.
Over 30 years of trusted value and commitment to customers.
Save. Green.
How do you no where to put the dipstick settings on nrw replacement board?
Thanks for contacting us. The new replacement board will come with an instructional pamphlet indicating dip switch settings and where to set correctly based on your model. If you need a new instructional sheet please send us an email to [email protected] and we can email it over.
Thanks,
ESESstoves