Country Flame

Country Flame pellet stove parts. We offer auger feed motors, combustion blower/exhaust fan kits, limit switches, igniters, door gasket, ash door gasket, and combustion motor gasket replacements.

Showing 1–16 of 23 results

  • Country Flame 1 RPM Auger Feed Motor & Agitator Stir Motor, Aftermarket

    $99.99
    Add to cart
  • Stove Bright Satin Black, High Temperature Brush On Paint, 16oz

    $22.95
    Add to cart
  • Pellethead Replacement Country Flame 1 RPM Auger Feed Motor & Agitator Stir Motor

    $48.95
    Add to cart
  • Country Flame Combustion Blower, Exhaust Fan Motor Kit, Aftermarket

    $139.99
    Add to cart
  • Pellethead Replacement MagnuM & Country Flame Low Limit Proof of Fire Snap Disc, F110-20F

    $19.99
    Add to cart
  • MagnuM, Country Flame, Reliant 225 Degree High Limit Safety Sensor Switch, OEM

    $49.99
    Add to cart
  • Stove Bright Charcoal, High Temperature Brush On Paint, 16oz

    $24.95
    Add to cart
  • Stove Bright Metallic Black, High Temperature Brush On Paint, 16oz

    $24.95
    Add to cart
  • Stove Bright Metallic Brown, High Temperature Brush On Paint, 16oz

    $24.95
    Add to cart
  • Pellethead Replacement Country Flame 200 Watt Igniter Element

    $23.99
    Read more
  • Pellethead Replacement Country Flame 400 Watt Igniter Element

    $31.00
    Add to cart
  • MagnuM & Country Flame Ash Pan Door Gasket, 1/2″ x 7′, Aftermarket

    $9.95
    Add to cart
  • Stove Bright Goldenfire Brown, High Temperature Brush On Paint, 16oz

    $24.95
    Add to cart
  • Pellethead Replacement Country Flame Harvester Firebox Door Rope Gasket, 3/4″ x 7′

    $18.00
    Add to cart
  • Pellethead Replacement MagnuM, Country Flame, Reliant Exhaust Motor, Combustion Blower Fan Gasket, 6″ Round

    $7.95
    Add to cart
  • Pellethead Replacement MagnuM, Country Flame, Reliant Exhaust Motor, Combustion Blower Fan Gasket, 6″ Round, Silicone

    $9.99
    Add to cart

Country Flame CrossFire-C, CrossFire-P, Harvester, Inglenook, and Little Rascal stove models will use a 1 RPM clockwise rotation auger feed/agitator motor, part PP-535-1. For most pellet models this will be the auger motor, for corn and multi-fuel stove models this will be the agitator/stirrer motor. Our gear motor replacements have a 3/8″ auger shaft, please double check the shaft size on your current motor as some models and years had a 1/2″ diameter auger shaft. General auger motor installation guide video below.

We offer two different replacement igniter elements for Country Flame stoves. The 200 watt igniter, part PP-664 and the 400 watt igniter, part PP-665. Crossfire-P and Little Rascal models originally used the 200 watt igniter, and in later years used the 400 watt igniter. The NPS1000 model will use the 200 watt igniter. Be sure to double check your igniter wattage and part number prior to ordering.

The igniter element is located in the burnpot area. During start-up, the igniter will get cherry hot and the combustion air rushing around the igniter becomes 'super-heated' creating ignition to the pellet fuel in the burnpot. As the igniter gets weak over time we will often notice missed ignition cycles or the element not functioning at all. Keep in mind it's the air rushing around the igniter lighting the fire. If there is air loss or air blockage issues in your Country Flame, there will be ignition issues.

If you are experiencing ignition troubles with your stove, check the simple things first

  • Burnpot is clean and seated properly
  • Front door and ash door are closed and the gasket seal is tight all the way around
  • Ash accumulation in the stove and exhaust venting has removed/cleaned out
  • Air intake passageway is free and clear
  • Combustion blower is running at proper voltage

You can also use a basic multi-meter to test the ohms on your igniter element to determine if it's in proper range. Watch our helpful guide videos below on igniter testing and common igniter replacement and installation.

Country Flame pellet stoves will have a low limit switch, high limit switch, and a vacuum pressure air switch which are all designed as safety features. Depending on the model there will be variances in the types of switches; be sure to reference your part number and model notes in our listings. The vacuum switch detects pressure inside the exhaust venting and firebox. If pressure is lost, it will trip and shut down power to the fuel feed auger.

See our helpful videos below for troubleshooting and learning more about how the limit switches and vacuum switches function in your stove.

We carry the 3/4″ diameter firebox door gasket kit for the Country Flame Harvester model, part PP1365. The door gasket creates the seal from the firebox door to the stove body/frame. Routinely inspect your door gasket and replace when there are notable signs of wear, fray, or air gaps. Country Flame BBF, B, E1, and R woodstove models will use a 1/2″ flat tape style gasket for the ash pan door seal, part R0092. Routinely check this gasket as well and replace when needed. General door gasket installation guide video below.

We offer a replacement combustion blower/exhaust fan motor kit for Country Flame CrossFire-C, CrossFire-P, Harvester, and Little Rascal stove models, part PP-353. The combustion blower is drawing air through the burnpot, up past the heat exchange tubes, down the rear fire wall, and expelling the exhaust gases out of the flue vent pipe. Routinely inspect and clean your combustion blower and housing from dust, debris, and accumulated ash build-up. If you are purchasing our combustion blower kit, follow along with our installation guide video below.

Looking for a Country Flame pellet or woodstove part you can't find? Please contact us for order inquiries and requests.