Showing all 2 results
Pellethead Replacement Pacific Energy Warmland PS45 400 Watt Ignitor Element$69.95
Pellethead Blue Fire Starter Gel – 2 PACK$12.99
Pacific Energy PS45 Warmland, True North TN40, True North TN40 Insert, and Warmland Classic pellet stove models will use a 400 watt igniter/ignition element. The igniter element is located in the base of burnpot area. During start-up, the igniter will get cherry hot and the combustion air rushing around the igniter becomes 'super-heated' creating ignition to the pellet fuel in the burnpot. As the igniter gets weak over time we will often notice missed ignition cycles or the element not functioning at all. Keep in mind it's the air rushing around the igniter lighting the fire. If there is air loss or air blockage issues in your Pacific Energy model, there will be ignition issues.
If you are experiencing ignition troubles with your stove, check the simple things first
- Burnpot is clean and seated properly
- Front door and ash door are closed and the gasket seal is tight all the way around
- Ash accumulation in the stove and exhaust venting has been removed/cleaned out
- Air intake passageway is free and clear
- Combustion blower is running at proper voltage
You can also use a basic multi-meter to test the ohms on your igniter element to determine if it's in proper range. Watch our helpful guide videos below on igniter testing and common igniter replacement and installation.
If you are looking for a replacement igniter you can't find on our page or any other specialty electrical replacement part for Pacific Energy, please contact us for special order details.