Showing all 5 results
Pellethead Replacement Travis Industries Avalon & Lopi Igniter Element, 2 Pack$48.99
Travis Industries Avalon & Lopi Super Igniter Element, 2 Pack, Aftermarket$94.00
Travis Industries Avalon & Lopi Super Igniter Element, Aftermarket$49.99
Pellethead Replacement Travis Industries Avalon & Lopi AGP Igniter Element$39.99
Pellethead Replacement Travis Industries Avalon & Lopi Igniter Element$25.95
Our 4″ 250 watt cartridge igniter element will replace Travis Industries Lopi part numbers 99300148 and 99300149. This igniter element will require you to use your previous igniter housing for installation. The Lopi APG model will use igniter element 250-02613 which includes the full assembly housing. During start-up, the igniter will receive an electrical charge from the control board allowing it to get cherry red hot. The combustion blower air rushing past the igniter will become 'super-heated' creating ignition to the pellets in the burnpot. Keep in mind that it is the hot air lighting the pellets; any air loss or air blockage issues can caused missed ignition cycles. Your can check the ohms on your igniter to determine if it is in proper operating range.
If your igniter ohms are in range and you are experiencing ignition troubles with your stove, check the simple things first:
- Burnpot is clean and seated properly
- Front door and ash door are closed and the gasket seal is tight all the way around
- Ash accumulation in the stove and exhaust venting has removed/cleaned out
- Air intake passageway is free and clear
- Combustion blower is running at proper voltage
For further igniter information and troubleshooting assistance please take a look at our video below.
When it's time to replace your Lopi stove igniter you can follow along with our general guide video below.
If you are looking for a replacement igniter you can't find on our page or any other specialty electrical replacement part for Lopi, please contact us for special order details.