Fill out the form below, and one of our reps will be in touch with you ASAP
NOTE: ESES offers information, services, parts, and accessories to all consumers. Regarding stove sales, we are limited to Wisconsin and Michigan territories only. If you live outside these areas, you will need to contact the manufacturer to find your nearest local stove dealer.
Free shipping on online orders over $75 to the continental U.S
Our Pellethead PH-CW1 is a top quality replacement for Country Flame Crossfire-C, Crossfire-P, Harvester, Inglenook, and Little Rascal pellet stove models. This auger feed motor has a 3/8" diameter motor shaft. Some models and years had a 1/2" diameter motor shaft. Please double check your existing motor prior to ordering. Replaces part number PP-535-1. This is a 120V, 1 RPM clockwise direction (when facing motor shaft) sealed bearing gearbox motor. Flat spot on the motor shaft to tighten the set bolt and wire leads for easy installation. General video reference guide below, please contact us for assistance.
Top Quality Import Replacement
1 RPM Auger Feed Motor & Agitator Stir Motor (3/8" Motor Shaft)
Clockwise Rotation When Facing the Shaft
Guaranteed Newest Stock Inventory
1 Year Manufacturer Warranty
Why Choose Pellethead?
On-Time Shipping
USA Retail Locations
Unmatched Warranty – No Hassles
Live Tech Support
We have over a 99.5% on-time shipment rate. Get your products on-time or before the estimated delivery date.
We are not fly by night online Retailers that will be here today and gone tomorrow.
We stand behind every product we sell with our no hassle warranty.
We offer tech support for every single product we sell. Have an issue, have a question? No problem give us a ring.
Our Pellethead PH-CW1 is a top quality replacement for Country Flame Crossfire-C, Crossfire-P, Harvester, Inglenook, and Little Rascal pellet stove models. This auger feed motor has a 3/8″ diameter motor shaft. Some models and years had a 1/2″ diameter motor shaft. Please double check your existing motor prior to ordering. Replaces part number PP-535-1. This is a 120V, 1 RPM clockwise direction (when facing motor shaft) sealed bearing gearbox motor. Flat spot on the motor shaft to tighten the set bolt and wire leads for easy installation. General video reference guide below, please contact us for assistance.
Top Quality Import Replacement
1 RPM Auger Feed Motor & Agitator Stir Motor (3/8″ Motor Shaft)
Clockwise Rotation When Facing the Shaft
Guaranteed Newest Stock Inventory
1 Year Manufacturer Warranty
Why Choose Pellethead?
On-Time Shipping
USA Retail Locations
Unmatched Warranty – No Hassles
Live Tech Support
We have over a 99.5% on-time shipment rate. Get your products on-time or before the estimated delivery date.
We are not fly by night online Retailers that will be here today and gone tomorrow.
We stand behind every product we sell with our no hassle warranty.
We offer tech support for every single product we sell. Have an issue, have a question? No problem give us a ring.
We have been in business 30 years, we are pellet stove specialists. Period.
We service our customers stoves, and provide you with the same quality parts.
Check out the only ash vacuum made by pellet stove professionals in a corded and cordless option.
Want to cook pizza in 3 minutes? Check out the Pellethead Smokin Po Boy.
Specs
Type
Auger Feed Motor & Agitator Motor for the Specified Models. NOTE: Please check the diameter of your current motors shaft. This motor has a 3/8" shaft, some models and years used a 1/2" shaft motor.
Size
3/8” Diameter x 1” Length Shaft – Flat Edge of Shaft for Securing with Set Collar. Wire leads measure 20” in length. We include both male and female spade connectors depending on your stoves configuration. Gearbox Measures 2-¾” Wide x 4-5/8” High x 1” Width (Width to screw mount hole 1-5/16”) Total width including magnet, armature and gearbox measures 2-1/8”.
Electrical
1 RPM Clockwise Rotation (When Facing the Shaft). 120V, 60HZ, AC, 1.03 Amps. Additional Spade Connectors are Included. If your original motor had a molex connection, you will snip that off and place on the spade connectors. Does not matter which wire connects to which during installation.
Models
Model Note
This Motor has a 3/8″ Diameter Shaft. Some models and years used a 1/2″ motor shaft. Please double check your auger/agitator motor prior to ordering.
Country Flame
CrossFire-C
CrossFire-P
Harvester
Inglenook
Little Rascal
Our Guarantee:
100% Best Price Guarantee
100% Satisfaction Guarantee
100% On-Time Shipping Commitment
Returns accepted within 30 days on products not used or installed
Over 30 years of trusted value and commitment to customers.